Agricultural fertilizer adding machine

The body of the Fertilizer Feeder is made of thickened carbon steel plate, which is durable and has a long service life; Pressure bearing tire, with large bearing capacity and good stability; It can be driven by the rear output shaft of the tractor, or by the gasoline engine or diesel engine, so it can use tractors, tricycles and pickup trucks. The fertilizer feeder can transport grain, chemical fertilizer, wheat seed, corn seed, feed, millet and other granular objects. The pipe spiral planning of the fertilizer manufacturer can prevent the fertilizer or seeds from sticking to the pipe wall. Soft spiral equipment shall be used to prevent fertilizer and seed damage and ensure seed germination rate. Modern planning saves time and labor. It is simple to operate. It says goodbye to artificial anti fertilizer and greatly improves labor efficiency.



Equipped with corresponding machines and tools, it can carry out soil lifting, earth building, shallow ditch trenching, base fertilizer application, weeding and soil breaking, local earth building, grape vine burying and other operations. The multi-functional grassland handling machine has the advantages of working, long service life and convenient maintenance. The agricultural fertilizer feeder includes a bottom plate, the top of which is equipped with an energy supply device, the top of which is equipped with a controller, the energy supply device is electrically connected with the controller, the right side of the energy supply device is equipped with a bucket, the bottom end of the cross plate is equipped with a ground plate, the bottom end of the bottom plate is equipped with a support frame, the bottom plate is connected with a runner through a support rod, and the agricultural fertilizer feeder drives the elastic rod to slide through the handle.



First place the machine on a flat and solid ground, and the machine must land steadily and horizontally. Check the fastening of bolts at all parts. If it is loose, it must be tightened again. Check vulnerable parts. In case of any damage, it must be replaced according to the specifications specified by the manufacturer, and it is not allowed to operate the machine with defects. Check whether the circuit line is safe. It is forbidden to work under the condition of electric leakage. Guidelines and operating specifications for using the fertilizer feeder:



1. Carefully read the instructions, and select the width of fertilizer application, the length and angle of the fertilizing plate of the fertilizer spreader and the position of each opening according to the amount of fertilizer application and the length of the ridge.



2. Check whether there are foreign matters at the fertilizer outlet of the fertilizer spreader. If there are foreign matters, they must be carefully cleaned to ensure that the fertilizer will not be stuck at the outlet and ensure the abnormal use of the machine. Check whether the fertilizer outlet of the fertilizer spreader is open or closed. If there is something unusual, adjust it in time.



3. The suspension device of the tractor is parallel to the upper plane of the fertilizer machine body and the ground. Ensure that the top of the fertilizer tray is about 70cm above the ground when full of fertilizer.



4. If the fertilizer is caked, it should be damaged in time. Avoid dropping foreign matters such as ropes and labels into the fertilizer box.



5. When we use it, we should pay attention to the amount of fertilizer and adjust the size of the fertilizer outlet of the fertilizer spreader appropriately.